MLX Series

Arrow MLX Series is a robust BHMA Grade 2 lockset featuring a freewheeling lever for abuse resistance, four-screw lock install for quick installation and a 10 year mechanical warranty. 


  • ANSI/BHMA A156.2, Series 4000, Grade 2
  • Underwriters Laboratories (UL and CUL) listed for use on 3 hour, A label single swinging doors.
  • Federal Specification FF-H-106C
  • ANSI A117.1 Accessibility Code
  • California State Reference Code–for levers returning to within 1/2" (12.7mm) of door surface.

ADA/Americans with Disabilities Act:
Acceptable Door Hardware: Section 4.13.9

Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and “U” shaped handles are acceptable designs.



Door Preparation: Cold rolled steel with zinc dichromate finish for corrosion resistance. Latch retractor is precision cast steel. Requires standard 2-1/8" (53.97 mm) bore through door

Backset: 2-3/4" (69.85 mm) backset standard, 2-3/8" (60.33 mm) optional.

Door Thickness: 1-3/8" (34.92 mm) to 1-3/4" (44.45 mm) standard

Latch: Stainless Steel 1/2" (12.7mm) throw, UL Listed, guarded latchbolt
on all locking functions

Latch front: 1-1/8" x 2-1/4" for 2-3/4" (69.85mm) backset

Strike: 4-7/8" ANSI (123.83mm)

Handing: Non handed

Freewheeling Lever

Exposed Trim: MLX Levers are pressure cast zinc measuring 4-3/4" (120.65mm) in length.MLX Roses are wrought brass 3-11/32" (84.8mm) diameter. Total projection from face of door is 2-17/32" (64.5mm)

Warranty: 10 Year Mechanical Warranty

Packaging: 6 per case

Cylinder: Solid brass 6 pin, Schlage CS keyway, SFIC and SIC

Keys: 2 brass keys

Finish: US3,US10B, US26D. Consult factory for the availability of other non-listed finishes


Request Information

Discuss your needs directly; fill out the form below.