Features
Mounting: Pull side mounting
Closer: Operates as mechanical surface closer during close cycles, when door is opened manually if power is on. Quiet Operation, spring force provides the feel of a normal manual door closer. Door can be opened manually if desired. Adjustable Spring Power. Electrically controlled backcheck sweep and latch.
Handing: Non-Handed
Switch: End-User On/Off Switch
Hold Open: Hold Open options: 0-30 seconds (5 seconds minimum required for ADA and ANSI/BHMA A156.19)
Obstruction Detection: Motor stops if door is obstructed during an opening
Overload Safety Shut-Off: After two minutes of receiving a door activation signal, the inverter will time out and close the door.
Motor Start Delay: 0-5 second delay to allow locking hardware to release first
Push and Go: As the door is manually opened, the operator senses movement and opens door to the full open position.
Electronic Motor Dampening: Provides feel of normal, manual door closer
Power Input: 120 VAC, 60Hz connects to wall outlet
Onboard power supply:
- Rated at 1.1 AMPS
- 24VDC filtered and regulated voltage output
- ETL listed
Current Draw: 0.6A
Relay Output:
SPDT
– Normally Open/Normally Closed (jumper)
– For electric strike function
Finishes: Aluminum (689) AL
Dark Bronze (690) DBZ
Warranty: 1-year warranty
Installation: Ease of installation and setup. Simple instructions.
Activation Options: Wall switches or radio frequency devices.
Plug-In Power Cord: An optional plug in power cord model is also available.